Differences

This shows you the differences between two versions of the page.

--- basics:intro [2015/02/20 19:57] – pvela
+++ basics:intro [2024/08/20 21:38] (current) – external edit 127.0.0.1
@@ Line 4: / Line 4: @@
 For now, refer to the following {{Basics:exp01.pdf | pdf file}}.
-  - For voltage regulation, you'll have to find the LM38T05 spec sheet.
+  - For voltage regulation, you'll have to find the LM38T05 spec sheet. If you want one, just ask James or Kevin in the ECE lab for a 5V voltage regulator (give them the part ID to be sure).
   - The LEDs have a current limit, so what component should you use to limit the current?
-  - The optoisolator spec sheets are {{Basics:6N138.pdf | here}}, {{Basics:PS2501.pdf | here}, and {{MCT6.pdf | here}.  They should all work the same.  I believe that the PS2501 (or maybe the MCT06) has a nice example circuit so you can see how the pull-down resistors should go (to effectively create pull-down voltage dividers).
+  - The optoisolator spec sheets are {{Basics:6N138.pdf | here}}, {{Basics:PS2501.pdf | here}}, and {{Basics:MCT6.pdf | here}}.  They should all work the same.  I believe that the PS2501 (or maybe the MCT06) has a nice example circuit so you can see how the pull-down resistors should go (to effectively create pull-down voltage dividers).
 ===== Arduino Basics =====