Patricio Vela: Course Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Embedded Control: Learning Adventures  ======
//<fs 150%>Building Robots</fs>//
---------------------------------------------

**Assumptions:** This series of embedded systems exercises presumes that not only is programming microprocessors in education friendly IDEs relatively new to you, but that the digital circuit design fundamentals are also. Some familiarity with programming in general is good since these adventures won't teach how to code, just what code to use.

The adventures will be a mixed bag since we use a variety of microcontrollers.  For the most part they adventures will revolve around NXP's mBed and TI's Launchpad (MSP432).  Since the TI microcontroller uses Energia, the code wil be mostly Arduino compatible.

**Philosophy:** Based on the assumptions above, the philosophy underlying the tutorials is that they should be somewhat informative regarding digital electronics for embedded systems, and how to build robotic systems from individual components. Furthermore, rather than provide actual solutions, this set of learning adventures provides some tips on what to do and follows it up with questions.  If you can find the answer to the question(s), then you've resolved that particular module. Since this is through a class project or some guided inquiry activity with me, I will provide feedback if you've missed some of the details in your answers.

===== Modules/Adventures =====
------------------------------

The following series of learning modules start from the ground up for interfacing the microcontrollers. They start with the assumption that you are able to work with the programming environment of your microcontroller (for TI, it's [[http://energia.nu/ | Energia]]; for mBed it is their [[https://developer.mbed.org/compiler/ | online compiler]] which requires an account).

Module Set 1: Learning to Sense and Actuate
  - [[embedded:adventures:DigitalIO | Digital I/O]].
  - [[embedded:adventures:AnalogIO | Analog I/O]].
  - [[embedded:adventures:DualPower | Bridging Power Supplies]]. 
  - [[embedded:adventures:RCServo | R/C Servos]].
  - [[embedded:adventures:MotoControl | Motor Controllers]].
  - [[embedded:adventures:Pots | Potentiometers/Variable Resistors]].
  - [[embedded:adventures:AnalogIMU | Analog IMUs]].
  - [[embedded:adventures:DigitalIMU | Digital IMUs]].
  - [[embedded:adventures:Encoders | Digital Encoders]].
  - [[embedded:adventures:Timing Interrupts | Timing Interrupts]].

Module Set 2: Communication and Miscellaneous
  - [[embedded:adventures:Quaternions | Quaternions]].
  - [[embedded:adventures:Xbee | XBee]].
  - [[embedded:adventures:Bluetooth Module | Bluetooth Module]].


Module Set 3: Low-Level Sensing and Control Algorithms
  - [[embedded:adventures:Driving | Drive Class]].
  - [[embedded:adventures:OrientEst | Estimating Orientation from Gyros]].
  - [[embedded:adventures:SpeedCtrl | Speed Control]].

Module Set 3: Bridging the Gap to Higher Level Robotic Control


-----
;#;
[[: | Main]]
;#;