Differences

This shows you the differences between two versions of the page.

--- basics:intro [2015/02/20 19:49] – pvela
+++ basics:intro [2024/08/20 21:38] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== ECE Basics ======
+===== Circuit Basics =====
 For now, refer to the following {{Basics:exp01.pdf | pdf file}}.
-- For voltage regulation, you'll have to find the LM38T05 spec sheet.
+  - For voltage regulation, you'll have to find the LM38T05 spec sheet. If you want one, just ask James or Kevin in the ECE lab for a 5V voltage regulator (give them the part ID to be sure).
-- The LEDs have a current limit, so what component should you use to limit the current?
+  - The LEDs have a current limit, so what component should you use to limit the current?
-- The optoisolator spec sheets are {{Basics:6N138.pdf | here}}, {{Basics:PS2501.pdf | here}, and {{MCT6.pdf | here}.  They should all work the same.  I believe that the PS2501 (or maybe the MCT06) has a nice example circuit so you can see how the pull-down resistors should go (to effectively create pull-down voltage dividers).
+  - The optoisolator spec sheets are {{Basics:6N138.pdf | here}}, {{Basics:PS2501.pdf | here}}, and {{Basics:MCT6.pdf | here}}.  They should all work the same.  I believe that the PS2501 (or maybe the MCT06) has a nice example circuit so you can see how the pull-down resistors should go (to effectively create pull-down voltage dividers).
-====== Arduino Basics ======
+===== Arduino Basics =====
+There are also a set of experiments for working with the Arduino.
+  * Experiment {{Basics:arduino01.pdf | set no. 1}}
+    - LED blinking via PWM.
+    - Analog input using a potentiometer as a voltage divider.
+    - Potentiometer plus optisolation and LED blinking.
+    - IMU reading.
+    - Binary switches and digital input
+  * Experiment {{Basics:arduino02.pdf | set no. 2}}
+    - PWM output and servo motors.
+    - External trigger.
+    - Motor encoder and counting.
 --------------